|
SPC Low Level Convectors offer fans with no electricity - Now that's innovative! |
|
|
|
HASL are pleased to announce that SPC have launched their new 2009-2010 Brochure. We have a number of new MINIB’s innovations: -
As a result of increased requirements for cooling our innovations have especially centred on units which provide both high outputs and the ability to add effective cooling to the space. Units in question are the single circuit HCM fan assisted convector capable of 2kW of heat output and 0.75kW of cooling output from a 1m length of trench. This unit is suitable for inclusion in a 2-pipe heating/cooling changeover system. Also new to the range is the HCM4pipe which has separate heating and cooling circuits to suit a 4-pipe system. -
MINIB has released the PTG range of fan assisted convectors using 12V DC fans but with no power supply required due to the innovative thermoelectric generators which provide power to the fans from the shot water flowing through the heating pipes. -
Many of the range of floor and wall-mounted convectors are now supplied with thermostatic valve head as standard (see catalogue for full details). -
All fan-assisted convectors are now supplied with temperature sensors to prevent the fans from running when the water temperatures are slow. Please click here to view our new MINIB Trench Heating brochure. Available on our web site.  MINIB are able to provide testing facilities at their factory in tier accredited test chamber. Tests provide documented heating outputs in line with EN 442-2. Here is a reminder of the standard features of MINIB units. ECONOMICAL HEATING
MINIB has been supplying energy efficient 12V DC fan motors for over three years. Compared to more commonly used AC fan motors an energy saving of around 801% is to be expected (average consumption of 12V DC fan motor is only 7W per meter of convector length). In addition, the DC motors can be readily equipped with advanced electronic controls to provide optimal comfort levels and energy efficiency. Unlike many other heat emitters, trench elements minimise the volume of water within the heat exchanger ensuring fast response and short warm-up times. STANDARD MINIB CONTROLS
a) On/off control – Type A,B,A1
b) On/off and 3 speed control- type C
c) IQ intelligent electronic control – Type E,D,E1 -
OTHER NEW PRODUCTS AND IMPROVEMENTS
As of 1st July 2009 the following innovations are available:
-
Fan assisted convectors: New models SK PTG,NK PTG. Reduced height on models KT110, KT 105.
-
Natural fan convectors: New high output models PMW90, PMW125, PMW165, PMW205, NW170, NW340, SW250, SW420. Reduced height on model PT105.
-
Special convectors: Increased output on models LP, KP.
-
As of 1st May 2009 end fitting have been supplied in 3/8” to ease installation on models HC, HC4pipe, HCM, HCM4pipe, KT-0, T50. STANDARD FEATURES
-
Stainless steel trough.
-
Stainless steel flexible connection hoses to facilitate piping-up and cleaning.
-
Shut off cock and adjustable valve.
-
Any type of segmented aluminium or wooden grille for standard convector lengths. -
Convectors with widths of 380mm and above are supplied with roll-up grille. Stainless steel grilles available at additional cost. Decorative surrounds also available at extra charge.
-
Safe low voltage fan motors. WARRANTIES
Full warranty of 2 years is provided for MINIB convectors as of the invoice date. Warranty on the stainless trough and the heat exchanger is extended to 10 years. The warranties do not cover damage caused by incorrect handling, incorrect installation, use in corrosive or salt-laden environments nor does it cover normal wear and tear. For more information on SPC products please see our Library section where you can obtain all catalogues & documents for SPC products offered by HASL. Alternatively, please call 01506 438083 where we will be only too happy to assist you further. Issue Date: October 2009 
|
